In Reply to: Wire Wheels-how to? posted by Curtis on November 08, 2005 at 19:35:18:
Triumph TR 2-3 used knockoff adapters for their wire wheel
applications. However, I don't know if the bolt pattern on their
adapters is the same as on a Turner. If you do get some adapters that
will work, be sure the nuts that are used to fasten them to your drums
do not interfer with the wire wheel. You may have to grind them down a
little bit to make them thinner. You may also have to cut the studs off
flush with the nuts after the adapters are installed. If they interfer
even a little, the wheel will not seat properly and will come loose
while driving.