In Reply to: Re: Mk 3 Trailing Arms posted by Ron taylor on September 06, 2003 at 05:01:51:
: : you have to manufacture them your self. Any sheet metal company
should manage this. when I made mine I found it best to retain the
large metal block that the torsion bars pass through and reweld/screw
to the new pressing, made mine from 14 swg stainless steel, two
pressings back to back and spot weld together. Make and weld in silent
block bush holder, The most difficult part is to produce the large diam
holes in the ends
ron (220wma)